Product Specs:
Other Info:
The Agilent HP 8517B, S-Parameter Test Set, has an architecture that develops a separate reference channel for each incident port. RF switching is done with a built-in electronic switch.

For active device measurements, the test sets include the ability to apply dc bias (external) to the test port center conductors.

Also available are two 60 dB step attenuators, which allow control of the port 1 and port 2 signal levels.
">
  Test equipment Connection, Worldwide test equipment sales



 
 

HP 8517B



Product Specs:

  • Frequency Range 0.045 to 50 GHz
  • Test Ports (port 1 or 2
  • Nominal Operating Power Level:
    • +2 to -29 dBm
    • Opt 007: +5 to -16 dBm
    • Connector Type: 2.4 mm, male
    • Impedance, DC Bias: 50 ohm nominal, 500 mA, 40 Vdc maximum
  • Attenuation Range (incident signal): 0 to 60 dB, in 10 dB steps










Other Info:

The Agilent HP 8517B, S-Parameter Test Set, has an
architecture that develops a separate reference channel for each
incident port. RF switching is done with a built-in electronic switch.

For
active device measurements, the test sets include the ability to apply
dc bias (external) to the test port center conductors.

Also available are two 60 dB step attenuators, which allow control of the port 1 and port 2 signal levels.

 

Test Equipment Connection is the leading dealer of reconditioned test & measurement equipment. We buy and sell bench top, general-purpose test and measurement equipment. We can save you Between 30 - 70 Off of the new list prices. Test equipment connection Rents, Leases, Buys, Sells, and Repairs the largest variety of equipment in the industry.

Click here for a quote on the HP 8517B