GENERAL_RADIO 1650B

The 1650B General-Purpose Logic Analyzer can be configured as a one or two-state analyzer, a state analyzer/timing analyzer, or a timing analyzer. The clocks and clock qualifiers allow your system to determine when the analyzer takes a sample. Storage qualification allows you to specify which states are stored in memory. Eight sequence levels determine the sequence of states. Eight pattern recognizers, one range recognizer or logical combinations of these are used to identify stored states. Tagging keeps track of the amount of time or the number of states between stored states. Enable/disable can be used to restrict storage to the activity of a specific routine. Timing to 100MHz for all 80 channels. State to 35MHz for all 80 channels. Memory is 1K bit per channel. Supports must 8, 16 and 32 bit microprocessors.

Product Specs:

    * Self-contained impedance measuring system
    * Includes six bridges for the measurement of:
          o capacitance
          o resistance
          o conductance
          o inductance
    * Generators and detectors necessary for DC and 1kHz measurements
    * Power is provided by four size D cells
    * Capacitance is measured from 1 pF to 1100 µF
    * Inductance range covers 1 µH to 1100 H
    * Resistance range (AC or DC) 1 mohm to 1.1 Mohms
    * Conductance range (AC or DC) 1 mmho to 1.1 mhos
    * Accuracy for the capacitance, inductance, resistance, and conductance is approximately ±1%
    * Dissipation factor:
          o (D) at 1 kHz is 0.001 to 1 (series C)
          o 0.1 to 50 (parallel C)
    * The storage factor:
          o (Q) at 1kHz is 0.02 to 10 (series L)
          o 1 to 1000 (parallel L)