ELGAR_CORP 3001

* Single Phase Output
* 3000 VA
* 0-65/130/260 V output
* 17.5” height

The B and SL series provide a wide range of single, two and three phase, precision solid-state AC power sources. Designed to provide variable voltage and frequency for testing linear loads over their full voltage and frequency ranges.

* Manual or IEEE-488 programmable using Elgar's Plug-in Programmers
* SL series provides 150% of rated capacity into linear resistive loads, while the B series are rated at 100% of capacity
* Low Harmonic Distortion - typically better than 0.4%
* Wide frequency range of 45 to 5000 Hz
* Overload and temperature protection
* Low effective output impedance
* Series and paralleling capabilities

Key Specifications
INPUT
Voltage: Standard inputs include 208VAC and 230VAC, 3 &Oslash. Consult us for how to specify.
Frequency: 47-63Hz, optional 400Hz available.

OSCILLATORS
SL & B Series sources require either a manual or Plug-in-programmer oscillator. These oscillators determine programmability of output voltage, frequency, phase, etc. See appropriate data sheets for further information.

OUTPUT
Voltage Range: Full rated VA from 55-65 VAC, 110-130 VAC, or 220-260 VAC over a ± 10% input variance and rated load PF of 0.7 to unity.
Output Frequency Range: 45 Hz to 5000 Hz at full rated power.
Load Regulation: ± 1% no load to full load over full frequency range; ± 0.015% when equipped with external sensing.
Line Regulation: ± 0.25% at rated load for a ± 10% input variance.
Total Harmonic Distortion:
SL Series: 0.4% 200 Hz to 1000 Hz; 0.6% Full frequency range
B Series: 0.5% 100 Hz to 1000 Hz; 0.9% Full frequency range